Wuxi PengdaHZ Intelligent Equipment Co., Ltd.
Address: No.1, Zhenye Road, Qianzhou Industry Park, Huishan Area, Wuxi City, Jiangsu Province
Phone Number:+86-510-83394311
Fax:+86-510-83381258
Mail:sales@wuxipd.com
Author:PHP Issued: March 27th, 2020
According to the fiber length in the plastics, fiber reinforced plastics can be divided into short FRP (fiber length from 0.2mm to 0.4mm), long FRP (usually > 10mm) and continuous FRP. Fiber materials mainly include glass fiber, aramid fiber, carbon fiber, basalt fiber and a small amount of metal fiber. PHP will introduce several common glass fibers.
1)SMC (Sheet Molding Compounds), semi-finished product is sheet material which is composed of short glass fiber (GF), UP and MD. SMC belongs to thermoset materials and can be formed by compression molding process.
2)BMC(Bulk Molding Compounds)is bulk prepreg which is composed of UP, GF and MD. BMC belongs to thermoset materials and can be formed by compression molding process or injection molding process.
3)GMT(Glass Mat Reinforced Thermoplastics), semi-finished product is sheet material which is laminated by glass fiber mat and thermoplastic plastics (thin film) and the final product is formed by compression molding process.
4)LFT-D(Long Fiber Reinforced Thermoplastics Direct), no semi-finished product; it is a mixture of fiber and plastics and it is directly formed by compression molding process. Some of LFT-D technology can realize direct injection molding.
5)LFT-G(Long Fiber Reinforced Thermoplastics Granules), the semi-finished products are plastic granules with the length from 10mm to 25mm and the final product is formed by compression molding process (length around 25mm) and injection molding (length around 10mm) and injection molding is the main direction.
6)All in all, considering lightweight and high performance products in automobile, aerospace, sports, rail traffic, construction and building materials, FRP materials have certain advantages in strength, size stability and long-term use.
PHP is specialized in making GFRP molding press which is mainly used for pressing SMC, GMT, LFT-D and other FRP materials. Our press uses servo system, which is energy saving and stable. At the same time, environmental protecting system is used to create a good production environment in the workshop. If you have any relevant questions, feel free to contact us at cindy@wuxipd.com or call us at +86 0510 83394311.